Ways to move a baby grand piano

Pianos consistently make movers annual list of products that are most regularly damaged. Grand pianos are particularly bothersome. Practicing the following procedures for dismantling, padding and packing grand pianos will avoid damage, lower claims expenditure, and enhance customer fulfillment.

1) At least three people are required to manage a child grand piano. If the baby grand piano requires to increase or down stairs or if a complete or concert grand piano needs to be transported, a minimum of four individuals are required.

2) Constantly finish a extensive and precise stock. It might be essential or more effective to utilize a visual stock to effectively explain and show pre-existing damage.

3) As various parts are disassembled, please location all hardware in a properly labeled parts bag and after that put the parts bag in a "Parts Box".

4) Get rid of the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furniture pad.

5) Disconnect the lid by removing the hinge pins. Wrap the cover in a clean furnishings pad.

6) Remove the prop that holds the cover open and cover it in a tidy furnishings pad. The prop has a hinge pin and remains in two pieces.

7) Remove the pedal assembly and wrap it in a clean furnishings pad. The braces at the back of the assembly rest in slots at each end. When removing the screws, please beware not to drop the braces. In addition, please be specifically careful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by positioning a piece of masking tape with the appropriate number on each rod. Note: If masking tape is unavailable, please usage correctly labeled parts bags for this function. When reassembling at destination, please make certain to put the rods in the correct order so that the pedals will work correctly.

8) Pad the piano by putting a clean rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you deal with the piano. Keep in mind: Please guarantee that the surface area of the piano is dust-free prior to padding it.

9) Position a piano board and attach the straps so that it is all set to receive the piano. The raised brace on the piano board should be at the keyboard end of the piano.

10) Remove the left front leg by positioning one person beneath the piano at the left end of the keyboard. Be sure to have 2 people raising the corner of the piano while the 3rd individual removes the leg. Note: Please be sure to note which legs were removed from which positions considering that some pianos have legs that are not interchangeable.

11) Location the piano on the piano board by decreasing the "leg-less" end onto the board. Please make certain to raise the whole piano somewhat while finishing this maneuver to prevent undue pressure on the staying, connected legs as the piano ideas. Lift the piano to an upright position on the board. Note: Please ensure that the soundboard is secure prior to lifting. Make sure that the piano is centered snugly versus the brace at the end of the piano board. Note: Never leave the piano ignored. Always have at least a single person holding the piano stable at all times.

12) Get rid of the two staying legs and cover them in tidy furniture pads. These legs are kept in location by a "key and slot" plan. To remove the leg, slide it inward towards the center of the piano up until pop over to these guys it comes out of the slot.

13) Secure the piano to the piano board by bringing completions of the straps together and fastening them. Place folded burlap pads over the furnishings pads but under the straps to offer extra protection to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, connect the loose ends of the two straps together.

14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for defense versus residence damage, position the keyboard end of the piano toward the bottom of the stairs. Attach a bulge strap to the leading end of the piano board to avoid the piano from slipping.

16) To fill the piano, leave it on the piano board and place it in a tier as the first base item with the keyboard facing the wall of the preceding tier. The very best place to pack read review the padded lid is between the piano and the preceding tier or in between the wall and the piano.

Although grand pianos represent a significant challenge, they can be moved without damage by utilizing common sense and practicing the procedures noted above.

Leave a Reply

Your email address will not be published. Required fields are marked *